Connect to TTY Device
You can connect the phone to a teletype (TTY) device for the hearing impaired. (TTY device sold separately.)
Note: Enable TTY only when using the phone with a TTY device.
1.Connect the TTY device to your phone.
2.From TTY Device, select OK to clear the notification.
3.Select one of the following:
–TTY Off disables TTY.
–TTY On enables TTY devices.
–TTY On + Talk enables TTY devices and voice carry over.
–TTY On + Hear enables TTY devices and hearing carry over.
Note: You can also enter ##889 with your keypad and select TTY to enable TTY.
Connect to Hearing Aid Device
With a
1.Connect the
2.From
Network
Enable Privacy Alert
From Privacy Alert, select Enabled to set your phone to alert you when enhanced digital CDMA privacy is lost or regained.
Enable Voice Privacy
From Voice Privacy, select Enhanced to use enhanced digital CDMA privacy.
Enable Roaming Service Alert
Use this setting if you want the phone to alert you when you roam outside of your home service area.
From Roam/Svc Alert, select one of the following:
•Disabled turns roaming service alert off.
•When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.
•On roam change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.
•On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.
User Guide | 63 |
