Citizen CH-452 instruction manual Plug the air hose connector, Mark will also be displayed but

MEASURING YOUR BLOOD PRESSURE

English	2	Plug the air hose		Air hose socket
		unit.
		connector into the main
		• Plug the air hose connector
Español		firmly into the air hose
		socket on the main unit, as
		illustrated.	Air hose connector
Português	3 Place the cuff at the height of the heart.
	4	abnormal, or if you want to stop the measurement process, press the
		Press the START/STOP switch (the blue switch).
	* If the pressurization value exceeds 280 mmHg, if pressurization feels
		START/STOP switch again. The cuff deflates, and the power turns off.
		1 All digits on the display blink for
		approximately one second.
		• All digits displayed is an initial
		display, indicating that the monitor is
		functioning normal.
Italiano		The mark will also be displayed but
		this does not indicate that the battery

needs to be replaced.

2 is displayed for approximately one

second. 中文 3 The cuff is pressurized automatically. Français

MEASURING YOUR BLOOD PRESSURE

4 is displayed soon after

pressurization is complete, and measurement begins automatically.

* If the unit judges that pressurization is insufficient, it automatically repressurizes.

5 blinks each time a pulse is detected, and the pressure value is displayed on the diastolic blood pressure display.

6Once measurement is complete, the

cuff deflates and the measurement results (systolic/diastolic blood pressure values, pulse) are displayed.

* Systolic/diastolic blood pressure values (two seconds) and pulse (one second) are displayed alternately.

* Provided there is no error in the measurement results, they are stored automatically.

5Finishing measurement.

• Press the “START/STOP” switch to turn the monitor off.

* When you want to stop measurement, press the “START/STOP” switch. The cuff is deflated and measurement stops.

START/STOP Switch

Français 中文 Italiano Deutsch Português Español English

- Eng 14 - - Eng 15 -