b. Recalling data:
(1). Press " M " button.If there is no data in the memory, only TIME/DATE and USER symbol will appear on the display. If yes, the ¿rst reading will be the average of
the latest 3 measurements. (The average value dose
not appear if there are two or fewer measurements
stored in memory.)
(2). Press " M " button again, the latest measurement will appear with the number as well as the recording date and time. The data called up on the display is numbered accordingly. After reading the recalled data as rotator
of the stored data, press " M " to switch to normal time.
(3). To discontinue in the midst of reading of the data,
press " 
START STOP
" button.
(4).You can select USER memory ( 1 
2 ) by
pressing " 
" button. c. Erasing data:
(1). Press " M " button and press " 
" to select USER
( 
1 
2 ).
(2). Press hold " 
" and " 
" button to clear memories. " CLA " show up on the display for 3 seconds.
E. To change batteries:
When " 
" show up on the display, the battery is weak. Change the batteries or it will not be possible to take blood pressure measurement. All batteries used must be the same type. Do not mix alkaline,
14 
