c. Press" | STOP | "button. Press " | " button to select USER | ||||
( 1 | START |
|
| " button again. All elements | |||
2 ) . Press " | STOP | ||||||
|
|
|
|
| START |
|
|
display '888' in 3 seconds. Afterward, displays the updated time. The measuring blood pressure symbol will Àash on the display and then the air pressure will automatically pump up to 195 mmHg. If blood pressure tends to be on the high level, the air pressure will automatically increase to the required level for measurement. * Do not move or talk in the midst of taking blood pressure measurement.
d. After the air pressure is increased, it will slowly decrease. When the pulse rate is detected, HEART RATE symbol
will start Àashing.
*Note!
• If the cuff does not stop inÀating, remove the cuff at once.
• To interrupt the measurement, you may press the | STOP | button. |
| START |
|
The cuff will deÀate immediately after a button is pressed.
e. After taking blood pressure measurement, the Systolic rate, Diastolic rate and pulse rate will be on the display for 1 minute.
D. Storing, recalling and erasing measurement data:
a. Storing data: 60 measurement values for 2 users each (120 memory in total)
After each blood pressure measurement, the Systolic rate, diastolic rate, heart rate and the time & date of speci¿c day will be automatically stored. The memory holds the latest
60 measurement data. If more than 60 measurements, the memory will automatically clear out the earliest data.
13
