4.1Setting/Replacing Paper Rolls
1.Pull the cover open button fully toward you.
2.Open the paper cover.
3.Insert a paper roll with is print area facing down as shown in the figure and pull out the paper end straightforward by several cm out of the printer.
4.Close the paper cover until a click can be heard.
WARNING
●When opening the paper cover, take care not to touch the print head or cutter blade. Otherwise, burning or injury of hand may result.
CAUTION!
●Always use the specified types of paper roll.
●Confirm that the paper roll is set correctly.
●When the paper is skewed and not extended straightforward from under the cover, open the cover and adjust the paper correctly.
●When closing the cover, press on the center part of the cover to close it firmly.
●When setting paper, pay attention not to let your fingers get injured by the edge of paper.
— 20 —