zPaper end sensor (PE sensor)
Detects when there is no paper. Printing stops when this sensor detects there is no paper.
zPaper thickness selection lever (blue)
Use this lever to select regular or thick paper according to the thickness of the paper being loaded. (Factory setting: 1)
CAUTION
Do not change the position of the paper thickness selection lever from the factory setting.
2.3 OtherzBuzzer
Buzzes when errors occur or when operations or command operations are performed.
Refer to 4.6 Error Messages
zUser memory
You can save
zMemory switch
Setting of various kinds of functions can be stored in memory. Settings remain stored in the memory even if the printer is turned off.
— 16 —