N. The log mode
[This is a function to confirm data that has been
automatically recorded when you dive while in the
diving mode].
Log Data: Maximum depth, dive time, dive month
and date, dive number, dive start time,
average depth, lowest water temperature,
diving completed time, All 8 items.
The log data memory can record a
maximum of 30 dives. (After the 31st
dive the oldest data will be erased. The
latest 30 dives are always recorded).
* Log data can be viewed in the log
mode.
Profile Data: In diving mode the depth is checked
every 5 seconds and the temperature
every 5 minutes.
You cannot read the data from the
watch. transfer the data to a personal
computer and confirm along with other
log data.
• When the “PLOG” dot display appears, it is possible
to transfer log data, with profile data included, to a
personal computer.
Profile log can record the latest 6 hours of data.
After exceeding 6 hours, the oldest data is
automatically deleted. We recommend that before
a total of 6 hours is exceeded, you transfer the
data to a personal computer.
It separately displays both 1st log display and 2nd
log display; you can select by pressing Abutton
1st log display.......Maximum depth, dive time, dive
month and date, dive number,
dive start time
2nd log display.....Average depth, lowest water
temperature
O. The transfer mode
[This function allows transfer of diving data to a
personal computer.]
1. You can change to the transfer mode from any
mode except the diving mode, by pressing ���
M
button for more than 2 secs.
2. In this mode, you can transfer data to a personal
computer by using the communications unit and a
RS-232C direct cable.
3. Compatible computers
IBM PC/ATor any other compatible computer
(There are some computers that are not
compatible).
4. Log data, including profile data to be transferred:
maximum depth/average depth/dive time/dive
month and date/dive number/dive start time/lowest
water temperature/dive completed time. These 8
items plus depth data for every 5 secs and water
temperature data for every 5 min.
5. About each connection:
Be sure to read the “Communications
AQUALAND GRAPH USER’S MANUAL” before
you make any connections.
1) Check that the personal computer switch is OFF.
2) Connect the personal computer and the
communications unit with the RS-232C direct
cable.
3) Switch the personal computer on, and start the
Aqualand graph.
4) Set the watch to transfer mode, and recall the
data you wish to send.
(The method to recall the data)
When the watch is changed to this mode, the
latest log data will be displayed.
However, when the log mode is changed to the
transfer mode the displayed profile data appears
together with the log data, can be transferred to
the PC.
6. From the log data including the newest profile
data, you can recall the other data in turn.
By pressing
Bbutton.
From the log data including the oldest profile
data, you can recall the other data in turn.
By pressing
Cbutton.
By operating each button, select the data you wish
to transfer to your personal computer.