3.PREPARATION

3.1Connecting the AC Power Cord

1.Turn off the printer power switch.

2.For AC power type (with built-in power supply), connect the AC power cord to the AC inlet at the back of the printer and plug the AC power cord into the wall outlet.

Power connector

Cable connector

Flat side

AC inlet

 

AC power cord

 

AC power type

DC power supply type

(built-in power supply)

 

CAUTION!

■When disconnecting a cable, DO NOT pull out by the cable. Always hold the plug.

■Always keep the printer away from other noise generating equipment.

■DO NOT pull the AC power cord. Otherwise fire, electric shock, or power disconnection may result.

■If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise fire or electric shock may result.

■Keep the power cord away from heat generating appliances. Otherwise the shield of power cord may be fused resulting in a fire or electric shock.

■If the printer will not be used for a long time, leave it disconnected from its supply outlet.

■Avoid locating the AC power cord in places which may cause tripping or falling.

— 15 —