Citizen Systems 90, Swift 120D, Swift 240+, Swift 240x, Swift 330+, Swift 330x, Swift 90x - page 36

36

Indicated by LEDs 2 and 3 flashing alternatively

Characteristic When an error is detected, the printer turns

OFF LINE.

Cause The paper select lever is changed whilst paper still

in printer’s mechanism or when paper is inserted from

both rear and bottom paper feeds

Remedy Remove the paper or re-set the lever position

and the printer will resume operation.

Home error

Indicated by LEDs 1 and 2 flashing alternatively

Characteristic When an error is detected the printer goes OFF LINE. Power is turned off and

then on again and the printer comes back ON LINE.

Cause The position of the print head is not correct, referred to as a “home error”. This is usually

caused by something jamming the print head. Remove the top cover of the printer and check for

obstructions including torn paper or an incorrectly placed ribbon. If the problem persists, you

make need to take the printer to your nearest service centre to ensure there is no lasting prob-

lem.

Remedy Turn power off then back on again.

Top Cover Open

Indicated by LED 1 flashing

Characteristic When an error is detected the printer goes OFF LINE.

Cause When top cover is open

Remedy Close top cover. Press ON LINE button.

Contents

Main Contents Page Product Warranty User Safety Instructions Introduction About This Printer Manual Page Chapter 1 Unpacking And Assembling Your Printer Unpacking The Printer Finding A Suitable Location Getting To Know Y our Printer Printer Components Assembling The Printer Installing The Ribbon Connecting To Your Computer Installing The Power Cable Chapter 2 Paper Handling And Loading Paper Types Installing The Tractor Unit Installing The Tractor In The Push Position Installing The Tractor Unit In The Pull Position Setting The Paper Thickness Adjusting The Paper Thickness Lever Setting the Paper Select Lever Paper Handling Summary Chart Printing On Continuous Paper Printing On Single Sheets Printing On Multi-Part Forms Printing On Continuous Feed Labels Printing On Envelopes Printing On Overhead Transparencies Special Paper Handling Features Paper Parking Paper Tear Off Top Of Form Fine Adjustment - VTOP Chapter 3 The Control Panel Basic Operations Changing The Appearance Of Text (The Mode Menu Groups) Changing The Font Changing The Text Pitch Changing The Style Of Printing Power-On Settings Making A Print Out Of The Printers Default Settings Changing The Default Settings Menu Mode Menu Functions The Install Menu Group Tear-Off Position Adjustments Printer Self-Tests Factory Default Settings The Buffer Memory Chapter 4 Setting Up Your Printer To Work With Your Software Microsoft Windows IBM PCs Or Compatibles Choosing A Suitable Emulation Codepages - International Characters Euro Currency Symbol Chapter 5 Maintenance And Fault Finding Problems And Solutions Error Messages And Their Causes Page Chapter 6 Printer Accessories RAM Modules Automatic Sheet Feeder Installing The Automatic Sheet Feeder ASF Specification Changing Between Continuous Forms And Single Sheets The Colour Kit Using The Colour Kit The Printer Stand The Serial interface Page Page Chapter 7 Specifications for each printer General Specifications