Set item

Initial value

Setting value

Remarks

 

 

 

 

Color Ribbon

ON

ON

Selects the color function.

 

 

OFF

During OFF, the change color command is ignored.

Take-Up Device

ON

ON

Selects the rewinder function.

 

 

 

During OFF, the rewinder motor does not operate.

 

 

 

 

Concerning Mechanical-SW operation

Functions that are not supported by the specifications at time of shipping have no impact on printer operation even when the settings are changed.

Examples) Items set for the Auto-Cutter in models that are not equipped with an Auto-Cutter.

Change of the setting of the Take-Up Device in models to which rewinder specifications do not apply.

Concerning Auto-Cutter operation

The minimum cutting interval is 1/2 inch (3 lines with 6LPI).

Once a cut command has been executed, even if a command is sent before the paper has fed at least 1/2 inch, the cut command is ignored so the cut action cannot be executed.

Initial Factory Shipping Mode

Setting the mode

1. Pressing the FEED switch twice in

maintenance mode (POWER LED is

 

flashing) causes the POWER LED, PAPER

 

OUT LED, and the ERROR LED to begin

Flashing Press twice

to flash.

2. Reopening and closing the front cover in this status switches the POWER LED, PAPER OUT LED, and the ERROR LED from flashing to continuously lit status.

3. Pressing the FEED switch for 3 seconds or

more restores settings to the factory

Reopening and closing the front cover:

shipping (initialized) status.

Flashing

 

Lit

 

Mode Maintenance

39