Printer Operation

Setting the Media

6.Setting sensor positions.

When using a transparent sensor

Move the bottom sensor close to the center of the width of the media then align the upper sensor marker and the bottom sensor marker. When using media that is 4 inches wide, position the upper sensor and the bottom sensor all the way to the right (head open lever side).

Upper sensor marker

Upper sensor

Aligned with the marker

Bottom sensor

Transparent sensor marker

Platen

Front

When using a reflective sensor

Adjust the position of the sensor so that the reflective sensor marker of the bottom sensor is at the center of the black mark of the media as shown below.

黒線

Media

Black mark

 

Bottom sensor

Black mark

Reflective sensor marker

Platen

Front

23