Appendixes
62
2 Specifications

Main Specifications

Item CLP-7001/7002 CLP-7401
Main scanning line density:
203 dots/in (8 dots/mm) Main scanning line density:
400 dots/in (15.75 dots/mm)
Resolution Sub-scanning line density:
203 dots/in (8 dots/mm) Sub-scanning line density:
406 dots/in (16 dots/mm)
Printing method Direct-thermal or thermal-
transfer printing
Max. print width 104 mm 4.1 in 105.7 mm 4.2 in
Max. print length 812.8 mm 32 in 254 mm 10 in
Printing
Print density Adjustable with software
Printing
speed
Printing speed
setting 27 in/sec in one-inch units (for
CLP-7001)
26 in/sec (for CLP-7002) 14 in/sec in one-inch units
Batch mode Performs normal printing (single
or multiple sheets)
Peel mode Peels label from the liner after
printing label
Cut mode Prints and cuts by the specified
number of sheets (label back-
feeding enabled)
Print mode
Tear-off mode Feeds back paper to the print
starting position after tearing
paper
Type of paper Roll or fanfold (continuous label,
die-cut, continuous tag or ticket)
Kinds of paper Direct-thermal or thermal-
transfer paper
Max. liner width 118 mm 4.65 in
Min. liner width 25.4 mm 1 in
Min. label width 7.62 mm 0.3 in
Min. paper pitch 5.08 mm 0.2 in
Max. paper
thickness 0.254 mm 0.01 in
Min. paper
thickness 0.0635 mm 0.0025 in
Paper
On-board roll
paper diam.
Max. outer diam.:
203 mm
Paper core:
38 76 mm
8 in
1.5 3 in
Width 25.4 114 mm (1 4.5 in) freely
adjustable
Length, max. 360 m 1,181 ft
Ribbon
Max. outer diam. 74 mm 2.91 in