Operation Panel

POWER LED

FEED switch

 

ERROR LED

●POWER LED

Lights when the printer power is on and goes off when the printer power is off. May blink or light in a special mode or in case of a failure.

●ERROR LED

Lights or blinks when paper is empty or in case of a failure. The interval length of blinking shows the type of error.

●FEED switch

Pressing this switch once causes a paper feed of one line. The longer the switch is pressed, the more the paper is fed.

In case of auto cutter error, press the FEED switch after removing the cause of the error to clear the error.

Rear Connectors

Interface connector

USB connector

Cash drawer

(Serial, parallel, etc.)

 

interface connector

Grounding terminal for drawer

Interface board

Power connector

mounting screws

 

●Interface connector (Serial, parallel, etc.)

Connects to the interface cable. A DIP switch is provided on the serial interface board.

●Cash drawer interface connector

Connects to the cable from the cash drawer.

●Power connector

Connects to the cable from AC adapter.

— 13 —