Citizen Systems CT-S310 manual 5.OTHER

5.OTHER

5.1External Views and Dimensions

(Unit: millimeter)

AC Adapter Type		Built-in Power Supply Type
145	84	145	86

121 159

195

195

5.2 Manual Setting of Memory Switch

Memory switches can be set manually or by a command. For manual setting, refer to the next page.

The function of each memory switch is shown in the following table. (The white-on-black characters are factory setting.)

Switch No.	Setting			0 (OFF)				1 (ON)
Memory SW1-1	Power ON Info				Valid		Not send
SW1-2	Buffer Size		4K bytes				45 bytes
SW1-3	Busy Condition			Full/Err						Full
SW1-4	Receive Error			Print ?			No Print
SW1-5	CR mode			Ignored						LF
SW1-6	Reserved				Fixed					−
SW1-7	DSR Signal			Invalid						Valid
SW1-8	Init Signal			Invalid						Valid
Memory SW2-1	Reserved					−			Fixed
SW2-2	Auto Cutter			Invalid						Valid
SW2-3	Spool Print			Invalid						Valid
SW2-4	Full Col Print	LineFeed					WaitData
SW2-5	Resume aft PE					Next				Top
SW2-6	Paper width			80mm				58mm
SW2-7	Reserved				Fixed					−
SW2-8	PNE Sensor				Valid			Invalid

— 25 —