iDP-3540/41 User’s Manual
CITIZEN 31/48
11. Function Selection
In order to meet the widest possible range of needs, various conditions can be selected by setting
the DIP switches.
11-1. Setting DIP Switch DS1
No. Function OFF ON Factory
Setting
1Auto Cutter NO YES *1
2International country (Refer to table below) OFF
3switching OFF
4Input buffer 7K Bytes 2 Lines OFF
5Character direction Normal Inverted OFF
6CR cord CR CR + LF OFF
7Mode Character Graphic *1
8SEL / DESEL at "power on " SELECT DESELECT OFF
Notes: *1) Setting is variable, depending on the type of printer.
No. USA FRANCE GERMAN
YENGLAND
2OFF ON OFF ON
3OFF OFF ON ON
11-2. Setting DIP Switch DS2
1) Serial interface only
No. Function OFF ON Factory
Setting
1Word length setting 8 bits 7 bits OFF
2Parity check YES NO ON
3Parity condition ODD EVEN OFF
4 - Not used -
5OFF
6Baud rate setting (Refer to the table
below) ON
7ON
8OFF