![](/images/new-backgrounds/1268322/26832231x1.webp)
External Appearance and Part Descriptions
3Optical Receiver
Receives printing data through infrared transmission.
4Serial Port
Connect the optional
5POWER Button(
)
Turns the printer’s power on and off.
To turn on the power, press this button continuously (2 to 3 seconds) until the power LED lights up.
6FEED Button (Paper Feed/Clear Error)
The paper is fed while this button is held down. The feeder does not operate unless the paper is set in the printer.
7Cover Open Button
Slide this button to open the cover. Close the cover after loading a roll paper.
8Paper Check Window
Use to confirm that paper is loaded in the printer.
9Cut Sheet Insertion Slot
Insert single sheets (cut sheets) of paper here.
0Paper Exit Slot/Paper Cutter
The printed paper exits from the printer here. The slot includes a cutter (tear bar), which is used to cut the paper from the roll after printing.
-Roll Paper Cover
Open the cover to load a roll paper. Close the cover after the paper is loaded.
16