▪

▪

▪

▪

- Set-Up Instructions (cont.)-

From outside the unit, unfold the Flexible

Rods into a straightened position.

Through either doorway, reach into the Tent and find a Rod Pocket located on either corner of the Hoop Tube com ing from the opposite side of the unit. Going through the doorway, slide one end of a Flexible Rod into this Rod Pocket, using the Fle xible Rod to push the Hoop Tube into its vertical position. Use one hand to hold it steady and the other to rotate the other Hoop Tube into its vertical position, before inserting the other end of the Flexible Rod into its corner Rod Pocket located diagonally across the unit. With the Flexible Rod now bowed downward, secure the center to the Velcro located in the center Roof Panel of the Tent.

Locate the other Fle xible Rod and insert its ends into the remaining Rod Pockets, then resecure the Roof Panel Velcro to include this Flexible Rod also.

At the crossing location of the Fle xible Rods, use your fingers to push the Rods upwards, reversing the bow direction and tightening the surrounding Tent.

Flexible Rod

Rod Pocket

▪

▪

▪

▪

- Take-Down Instructions -

Remove the Flexible Rods, fold them up, and place them both onto the same floor half.

One Hoop Tube at a time, use your fingers to disengage the Spring Buttons and collapse each Hoop Tube before rotating them down onto their respective floors.

Go around the unit and gather the Tent material onto the floor, so that when folded, all will be protected between folded floors.

Fold the empty floor half onto the floor half containing the folded Flexible Rods. Use the provided Latch Clips to secure the unit together by placing them on the outside edges. The Eyelets of the Latch Clips may be used as an anchor point for roping down gear on top of the unit while pulling to your fishing destination.

Notice!! - T he Tow Rope of this unit is intended for walking use only. Any damage incurred

from pulling behind a motorized vehicle is not covered under warranty.

3

Page 2 Page 4
Page 3
Image 3
Clam Corp 8200 manual Take-Down Instructions
Page 2 Page 4

8200 specifications

Clam Corp 8200 is an innovative product renowned for its cutting-edge features and robust technologies, making it a standout in its category. Designed to cater to both enthusiasts and professionals, the Clam Corp 8200 is engineered to deliver exceptional performance and reliability in various applications.

One of the main features of the Clam Corp 8200 is its advanced processing unit, which provides unparalleled speed and efficiency. This power enables seamless multitasking, allowing users to handle complex tasks without experiencing lag or downtime. Additionally, the unit is optimized for energy efficiency, ensuring that it functions effectively while consuming less power compared to its competitors.

The Clam Corp 8200 integrates state-of-the-art connectivity options, including Wi-Fi 6 and Bluetooth 5.0 technology. These modern connectivity standards ensure fast and reliable internet speeds, enabling users to enjoy high-speed data transfers and smooth streaming experiences. The built-in network security protocols protect user data while enhancing overall performance.

In terms of user interface, the Clam Corp 8200 offers a sleek and intuitive design. The high-definition touchscreen display provides crystal-clear visuals, making it easy for users to navigate through various applications. The interface is user-friendly, allowing even those with minimal technical backgrounds to operate the device with ease.

The Clam Corp 8200’s durability is another noteworthy characteristic. Constructed from high-quality materials, it is designed to withstand the rigors of daily use, ensuring long-lasting performance. This resilience is particularly beneficial for users in demanding environments, where devices are subject to wear and tear.

Moreover, the Clam Corp 8200 features a modular design, which allows for easy upgrades and customization. This flexibility is a key advantage for users looking to enhance their device's capabilities over time, ensuring that it remains relevant and efficient as technology evolves.

Overall, the Clam Corp 8200 stands out in the market due to its powerful processing capabilities, modern connectivity options, user-friendly interface, durability, and customizable design. These attributes make it an ideal choice for individuals and organizations seeking a reliable and efficient solution for their technological needs. Whether for professional applications or personal use, the Clam Corp 8200 is designed to exceed user expectations and set a new standard in its class.
Top Page Image Contents