5. OPERATION

Basic Operations

Note: Be sure to read this chapter by referring to the front diagrams

in chapter 2. CONTROLS on page 3 (unfold).

English

CAUTION

When this unit is turned on, starting and stopping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume.

Adjusting the bass

1.Press A-M button 4 and select “BASS”.

2.Turning the Rotary knob 3 clockwise emphasizes the bass; turning it counterclock- wise attenuates the bass.

*The factory default setting is “0”. (Adjustment

Turning on the power and adjusting the volume

1)Press the POWER button 5.

*To turn the power on and off, press the POWER button.

2)Turning the Rotary knob 3 clockwise increases the volume; turning it counterclock- wise decreases the volume.

*The volume level is from 0 (minimum) to 33 (max- imum).

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.

*The factory default setting is “OFF”.

Each time you press Z-EHCR button 7, the tone effect changes in the following order:

“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜

“OFF” ➜ “Z-EHCR 1”...

•Z-EHCR 1 : bass emphasized

•Z-EHCR 2 : treble emphasized

•Z-EHCR 3 : bass and treble emphasized

• OFF

: no sound effect

Adjusting the tone

Press A-M button 4 and select the item to adjust. Each time you press A-M button 4, the item changes in the following order:

“BASS 0” ➜ “TREB 0” ➜ “BAL 0” ➜ “FAD 0”

➜Function mode...

range: –6 to +6)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

Adjusting the treble

1.Press A-M button 4 and select “TREB”.

2.Turning the Rotary knob 3 clockwise emphasizes the treble; turning it counter- clockwise attenuates the treble.

*The factory default setting is “0”. (Adjustment range: –6 to +6)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

Adjusting the balance

1.Press A-M button 4 and select “BAL”.

2.Turning the Rotary knob 3 clockwise emphasizes the sound from the right speak- er; turning it counterclockwise emphasizes the sound from the left speaker.

*The factory default setting is “0”. (Adjustment range: L9 to R9)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

Adjusting the fader

1.Press A-M button 4 and select “FAD”.

2.Turning the Rotary knob 3 clockwise emphasizes the sound from the front speak- ers; turning it counterclockwise emphasizes the sound from the rear speakers.

*The factory default setting is “0”. (Adjustment range: F9 to R9)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

6 AB243R/AB243RG