Basic Operations
Switching display
While pressing the BAND button 6, press the DISP button % to select the desired display.
The display switches in the following order:
Main ➜ Clock (CT) ➜ Main ...
*If the display is changed by other button operation when the clock (CT) is displayed, the clock display returns automatically after the operation.
*The example shows the display in radio mode.
Radio Operations
Listening to the radio
1)To tune in a station, first use the BAND but- ton 6 to select FM (FM1, FM2, FM3, FM4) or AM (MW/LW).
The band switches as follows each time the BAND button 6 is pressed:
FM1 ➜ FM2 ➜ FM3 ➜ FM4 ➜ AM ➜ FM1 (The FM1, FM2, FM3 and FM4 bands are provided so that a maximum of 20 FM sta- tions can be preset, but the reception fre- quency range is the same for all four.)
2)Press the up or down button 1. Tuning auto- matically stops at a broadcasting frequency. (Seek tuning)
Seek tuning
There are two types of seek tuning: DX seek, in which receivable stations are tuned in order, and Local seek, in which only stations with good reception are tuned in.
DX seek
1)Press the BAND button 6 to select the band.
2)Press the up or down button 1. “DX” appears in the display, and tuning automati- cally stops at a broadcasting frequency.
Local seek
1)Press the BAND button 6 to select the band.
2)Press the up or down button 1 for 1second or longer. “LO” appears in the display, and tuning automatically stops at a broadcasting frequency.
Manual tuning
1)Press the BAND button 6 to select the band.
2)Press the BAND button 6 for 2 seconds or longer.
3)“MAN” appears in the display, and manual tuning is possible.
4)Use the up or down buttons 1 to tune in sta- tions.
*The mode automatically switches back to the seek tuning mode after 7 seconds.
English
AB243R/AB243RG 7