Clarion APX200.2, APX400.2 manual

4.A secure clean ground connection is critical to the performance of your Clarion amplifier. Use the shortest ground wire possible snd securely connect to the car chassis to minimize resistance and avoid noise problems.

5.Add an external fuse on the amplifier’s positive (+) power lead and connect it as close as possible to the vehicle’s (+) battery terminal. Use a rating that equals the total current consumption at full output of all amplifiers in the system. Adding an external fuse will protect the electrical system from short circuits that can cause a fire.

6.Refer to Figure 6 when making electrical connections. Connect the amplifier’s positive (+) lead via a fuse directly to the positive (+) terminal on the battery. Do not connect this wire to the car’s fuse panel. Use red-insulated 10-gauge (or larger) wire for the amplifier’s positive (+) power lead and the same-gauge black-insulated wire for the ground.

7.When replacing the amplifier’s fuse, always use one having the same current rating. Substituting a higher-rated fuse or a slow-blow type can result in serious damage to the amplifier.

8.Never ground the speakers to the vehicle chassis or body.

9.Make sure that your vehicle’s electrical system (alternator, battery, etc.) is capable of handling the additional load. If you are planning a multi-amplifier system, you may need to add a second battery and possibly upgrade the alternator with a higher-output rated model. Consult your authorized Clarion dealer for recommendations.

10.To avoid noise problems, run the amplifier’s positive (+) power lead along one side of the vehicle to the battery. Run the remote turn-on wire and RCA audio cables down the center, and route the speaker wires along the remaining side. If wires must cross, run them perpendicular to each other.

11.When creating passage holes for the power wire, use grommets to eliminate any sharp edges created during drilling. This will protect the wire from being nicked and causing a short circuit.

12.Extra cable can cause signal loss and act as an “antenna” for noise. Use only high-quality RCA cables that are no longer than necessary to make a direct connection with the source unit or equalizer.

APX400.2, APX200.2 specifications

The Clarion APX200.2 and APX400.2 are premium amplifier models that cater to audiophiles looking to enhance their audio systems with superior sound quality and performance. These amplifiers are renowned for their innovative technologies, superior build quality, and user-friendly designs, making them an excellent choice for both newcomers and seasoned enthusiasts in car audio.

The APX200.2 model is a compact, two-channel amplifier that delivers a power output of 100 watts RMS per channel at 4 ohms, making it suitable for driving various speakers and subwoofers. It features a high/low pass crossover which allows users to tailor the frequency response according to their preferences, ensuring an optimal listening experience. The APX200.2 also incorporates a bass boost function, which enhances low-frequency performance, ideal for those who enjoy deep and powerful bass.

On the other hand, the APX400.2 is a more powerful option, providing 200 watts RMS per channel at 4 ohms. This amplifier is designed for users who demand higher power and performance, significantly enhancing the sound system’s overall dynamics and clarity. Like the APX200.2, the APX400.2 includes a high/low pass crossover and bass boost function, giving users complete control over their audio tuning.

Both models feature a Class D design, which not only contributes to their lightweight and compact size but also ensures higher efficiency and lower heat generation compared to traditional Class AB amplifiers. This allows for extended playback times without the risk of overheating, making them ideal for intense listening sessions.

The APX series amplifiers are also equipped with advanced thermal protection and short-circuit protection features, enhancing their reliability and longevity. The robust build quality ensures they can withstand the rigors of automotive environments, providing peace of mind for users.

In terms of installation, both models come with a user-friendly design, allowing for straightforward connections with clear labeling and wiring harnesses. The sleek, modern aesthetic is designed to complement any car interior, making these amplifiers not just functional but also visually appealing.

Overall, the Clarion APX200.2 and APX400.2 amplifiers offer exceptional performance, versatility, and durability, making them outstanding choices for anyone looking to elevate their car audio experience. Whether for everyday listening or high-intensity audio sessions, these amplifiers deliver impressive sound quality that is sure to satisfy even the most discerning audiophiles.