Problem

Distorted audio.

Solution

Gain is not set properly, or damaged speaker cones. Review Setting Gain; inspect each speaker cone for signs of damage (i.e. frozen cone, burning smell, etc.)

Problem

Audio lacks punch.

Solution

Speakers wired incorrectly, which causes cancellation of bass frequencies. Check polarity of wires from amplifier to each speaker as defined by the system design.

Problem

Amplifier fuse keeps blowing.

Solution

Incorrect wiring or short circuit. Review Installation and check all wiring connections.

Problem

Whining or ticking noise in the audio with engine on.

Solution

Amplifier is picking up alternator noise or radiated noise. Turn down input gain; move audio cables away from power wires. Check power and ground connections on amplifier; install an in-line noise filter on source unit’s power wire; check alternator and/or voltage regulator; test for weak battery or add water to battery

PRODUCT SPECS

 

APX400.2M

Frequency Response

20Hz ~ 20kHz

Signal Noise Ratio

>98db

THD

.05% all channels driven

Input Sensitivity Low Level

250mV ~ 2.5 V

Input Sensitivity Speaker Level

500mV ~ 5V

Max. Power Output

380w (190 x 2)

Cont. Power Output

200w (100w x 2) @ .08% THD

2-Ohm Stereo Output

190 x 2 @ .05% THD

Bridged Power

280 x 1 @ .05% THD

Dimensions

2 1/8”H x 8 1/4”W x 12” L

Current Consumption at output @ max power

43A @ 382 Watts

12

Page 13 Page 15
Page 14
Image 14
Clarion APX400.2M manual Product Specs
Page 13 Page 15

APX400.2M specifications

The Clarion APX400.2M is a powerful and versatile 2-channel amplifier designed to deliver high-quality audio performance for car enthusiasts and audiophiles alike. Known for its durability and efficiency, this amplifier is built to enhance the listening experience in any vehicle.

One of the key features of the APX400.2M is its impressive power output. With a maximum power rating of 400 watts, this amplifier can drive a variety of speakers, providing clear and powerful sound reproduction at any volume level. Its RMS output of 100 watts per channel at 4 ohms ensures that users receive a consistent and reliable audio experience.

Another significant characteristic of the APX400.2M is its Class D amplifier technology. This design not only contributes to the lightweight and compact form factor of the unit but also ensures greater energy efficiency compared to traditional Class A/B amplifiers. As a result, minimal heat is generated, allowing for extended listening sessions without the worry of overheating.

The APX400.2M features an adjustable high-pass filter, which allows users to tailor the sound to their specific preferences and needs. This filter helps to eliminate unwanted low frequencies, ensuring that the audio output remains clean and distortion-free, particularly when paired with subwoofers. Additionally, the amplifier includes a bass boost function, which can be activated to enrich the low-end response, making it ideal for genres such as hip-hop and electronic music.

Installation convenience is another noteworthy aspect of the Clarion APX400.2M. The amplifier is designed with a compact footprint, enabling it to fit in various locations within the vehicle without consuming excessive space. Consequently, it is an excellent choice for those with smaller vehicles or limited installation options. Moreover, the amplifier features a robust construction, ensuring it withstands the rigors of the automotive environment, including vibrations and temperature fluctuations.

In summary, the Clarion APX400.2M stands out with its powerful performance, energy-efficient Class D technology, adjustable high-pass filter, and durable construction. This amplifier is an excellent choice for anyone looking to elevate their car audio system, delivering impressive sound quality and reliability. Whether for everyday driving or a weekend road trip, the APX400.2M is sure to satisfy even the most discerning audio enthusiasts.
Top Page Image Contents