DESCRIPTION
The Clarion APX400.2M two-channel amplifier provides 2x70 watts of power into a 4 ohm load and 2x110 watts of power into a 2 ohm load. This full featured model is an excellent choice for a variety of marine audio sound system configurations.
The APX400.2M uses an unregulated MOSFET power supply for superior control of output wattage. A toroid-coil transformer yields maximum power transfer with minimum heat loss. Careful attention to circuit design keeps AM RFI at low levels, so you won’t hear unwanted noise when the level is cranked up. Protection circuits safeguard the amplifier when overheating and speaker shorts or improper load conditions occur.
All connections and controls of the APX400.2M are on the end panels and are easy to understand. We use gold-plated RCA and barrier connectors to ensure the best electrical connection for your system. Included is an external automotive type fuse that is easy to replace.
INPUT CONNECTIONS AND AUDIO CONTROLS
The front panel of the APX400.2M contains connections for RCAInputs, Speaker Level Inputs and Audio Controls as shown below.
The RCAInput Connections are gold-plated RCA Jacks and are labeled as RIGHT and LEFT.
Figure 1-
1. RCA Input Jacks | 5. | Crossover Frequency Multiplier Switch |
2. Gain Control | 6. X-Over Mode Switch |
3. Bass Boost Control | 7. | Input Select Switch |
4. Freq (Hz) Selection Control | 8. Speaker Level Inputs |
