OWNER'S MANUAL

DESCRIPTION

The Clarion APX600.5 five channel car audio amplifier is an excellent choice for creating a variety of multi-channel sound systems. It features built-in system design flexibility that allows you to create a 3, 4, or 5 channel amplifier system with a flip of a switch. You can also configure the front, rear and subwoofer amplifier sections to drive a set of satellite speakers and/or subwoofer.

The built-in 12 dB per octave electronic crossover lets you custom tailor the sound of the front and rear channels, using two independent filters with adjustable crossover frequencies for high-pass or low-pass filtering.

The amplifier also uses an unregulated MOSFET power supply for superior control of output wattage. A toroid-coil transformer yields maximum power transfer with minimum heat loss. Careful circuit design keeps AM RFI at low levels, so you won’t hear unwanted noise when the level is cranked up. Protection circuits safeguard the amplifier when overheating, speaker shorts or improper load conditions occur.

The main connections and controls are on the end panels and are easy to understand. System configuration switches and signal flow chart are on the bottom panel of the amplifier. Gold-plated RCA and barrier connectors are used to ensure the best electrical connection for your system.

INPUT CONNECTIONS AND AUDIO CONTROL

The front panel of the APX600.5 contains connections for High / Low Level Inputs and Audio Adjustments as shown below.

Figure 1-

DESCRIPTION

1

Speaker High Level Inputs

7

Front Hi Pass Frequency Control

2

Rear RCA Input Jacks

8

Sub Low Pass Frequency Control

3

Front RCA Input Jacks

9

Power Indicator

4

Sub RCA Input Jacks

0

Rear Hi Pass Frequency Control

5

Gain Controls

q Front Frequency Multiplier Switch

6

Rear Hi / Low Frequency Control

w Subwoofer Bass Boost Control

3

Page 3
Image 3
Clarion APX600.5 manual Description, Input Connections and Audio Control

APX600.5 specifications

The Clarion APX600.5 is a versatile and high-performance 5-channel amplifier designed for car audio enthusiasts who demand exceptional sound quality and power. With its compact design and impressive specifications, this amplifier stands out as a reliable solution for enhancing the audio experience in any vehicle.

One of the main features of the APX600.5 is its power output. This amplifier delivers up to 600 watts of peak power, making it suitable for driving a combination of speakers and subwoofers effectively. The RMS power rating of 75 watts per channel at 4 ohms ensures that it can handle a variety of audio setups, allowing users to configure their systems as they see fit. Its ability to drive multiple channels simultaneously also makes it an efficient choice for those looking to maximize their audio setup without the need for multiple amplifiers.

The APX600.5 utilizes advanced Class D technology, which ensures a high level of efficiency and reduced heat generation compared to traditional Class A/B amplifiers. This not only contributes to the longevity and reliability of the unit but also means that users can enjoy high power output without the worry of overheating. Additionally, the amplifier features a compact design that maximizes space in the vehicle, making it easier to install even in tight locations.

Another noteworthy characteristic of the Clarion APX600.5 is its extensive crossover capabilities. The amplifier is equipped with adjustable high-pass and low-pass filters that allow for precise tuning of audio frequencies. This feature helps users achieve optimal sound quality and maintain clarity even at high volumes.

The built-in protection circuitry is another key technology that sets this amplifier apart. It features short-circuit protection, thermal overload protection, and DC offset protection, which ensures safe operation and prevents damage to both the amplifier and the connected speakers.

The APX600.5 also boasts an elegant design with a sleek finish that complements any vehicle's interior. The intuitive layout and clear terminal labeling simplify installation and adjustments, making it user-friendly.

In summary, the Clarion APX600.5 is an excellent choice for car audio enthusiasts seeking power, efficiency, and flexibility in a single compact amplifier. With its advanced technologies and features, it delivers top-notch audio performance that enhances any driving experience.