Clarion ARX4570 owner manual Radio Operation

English

Radio Operation

FM Reception

For enhanced FM performance the ® tuner includes signal actuated stereo control and Multipath noise reduction circuits.

Listening to the Radio

1)Press the FNC button 5 and select the radio mode. The radio turns on.

2)To tune in a preset station, first press the BND button 18 and select FM1, FM2, FM3 or AM.

The band changes as follows each time the BND button is pressed:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1

3)Use the Preset buttons 11 to select the desired station.

Seek Tuning

1)Press the BND button 18 and select the desired band.

2)The seek tuning mode is set when “SRCH” is lit on the display.

3)Press the Left or Right button 20 . Seek tuning automatically stops when a station is found.

Manual Tuning

1)Press the BND button 18 and select the desired band.

2)Press the BND button again for more than 2 seconds. “SRCH” turns off and the manual tuning mode is set.

3)Use the Left and Right buttons 20 to tune in the desired frequency.

Presetting Stations

A total of 24 stations can be preset, 6 each for the FM1, FM2, FM3 and AM bands.

Note:

•When a station is preset, the station previously stored in the memory at that position is cleared.

Presetting stations manually

1)Press the BND button 18 to select the band at which to store the station.

2)Use the Left and Right buttons 20 to tune in the station to be preset.

3)Press the Preset button 11 at which you want to store that station for at least 2 seconds.

Auto store function (Automatic Station Store)

1)Press the BND button 18 to select the band at which to store the stations.

2)Press the AS button 8 . Stations with good reception are automatically stored at Preset buttons 11 1 to 6.

*If there are fewer than 6 stations with good recep- tion, the stations previously stored at the remain- ing buttons are not cleared.

Preset Scanning (Preset Station Scan)

When the PS button 7 is pressed, the preset memory numbers flash and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the PS button again to cancel the preset scanning mode.

Instant Station Recall (ISR) Function

This function allows you to recall a specific radio station from any mode. Use it to find stations quickly when you want to hear specific informa- tion (such as traffic announcements) while dri- ving. The ISR station is set to 87.9 MHz upon shipment from the factory.

Setting the ISR station

1)Press the FNC button 5 to select the radio mode.

2)Tune in the station to be set as the ISR sta- tion.

3)Press the ISR button 9 for more than 2 sec- onds to store that station in the memory as the ISR station.

Recalling the ISR station

Press the ISR button 9 from any mode. “ISR” appears on the display and the set station is tuned in. To cancel, press the ISR button again.

10