6. REMOTE CONTROL
| 1. FEATURES |
Handling Cassette Tapes
Receiver for remote control unit
OPEN
ARX7570z
ISR | 1 | 2 | 3 | 4 | 5 | 6 |
|
| Operating range: 30°in all directions |
| Remote control unit | Signal transmitter |
■ Rotary Encoder Volume Control with Illuminated Search Key |
■ |
■ Controller for Optional TV Tuner Module |
■ Capability to Read CD TEXT Data from Clarion Compatible CD Changer |
■ |
■ CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling |
■ | ® FM Reception System |
■Full Logic Tape Transport with True Function / Auto Reverse with Dual Azimuth Adjust
■Dolby ® B Noise Reduction
■
■
■160W (40W×4) Maximum Power Output
2.PRECAUTIONS
This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.
Using any of the following types of cassette tapes can cause malfunctions.
•Cassette tapes with low recording levels
•Cassette tapes in which the unrecorded sec- tion between tracks is shorter than 4 seconds
•Cassette tapes with noise or the like recorded between tracks
•Cassette tapes on which there are long unre- corded sections in the middle of a track
Handling precautions
•Slack in the tape can cause malfunctions. In particular for prerecorded cassette tapes and
•Avoid using cassettes of 120 minutes or longer. (Such cassettes have extremely thin tape, so the tape can become stretched or cut.)
•Periodically play a cleaning cassette in the player to clean the head.
•Keep magnet items like magnets, and iron and steel items like screwdrivers away from both cassette tapes and the tape head in the player.
•Do not oil the cassette mechanism.
•Do not use any cassette tapes with peeling labels or deformed cases. Such cassette tapes can cause breakdowns.
•When not using the player, always take the cassette out of the mechanism. Exposing a cassette to direct sunlight, extreme tempera- tures or high humidity can damage the cas- sette.
This equipment generates, uses, and can radi- ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
CAUTION
CHANGES OR MODIFICATIONS NOT EX- PRESSLY APPROVED BY THE MANUFAC-
Flip Down Panel
The ARX7570z uses a
Inserting the Batteries
munications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.
TURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
INFORMATION FOR USERS:.CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANU- FACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
CAUTION
When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured.
1. Always use the ARX7570z with the FLIP |
DOWN PANEL closed. |
3.Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open.
4.When closing the FLIP DOWN PANEL, do not press the OPEN button 1.
5.Strong impacts to the operating or display section can cause damage or deformation.
6.If the FLIP DOWN PANEL does not open fully, gently open it with your hand.
1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow.
2.Insert the AA
Notes:
Using batteries improperly can cause them to ex- plode. Take note of the following points:
¥When replacing batteries, replace both batteries
with new ones. | Rear side |
|
¥Do not
¥Do not dispose of batteries into fire or water.
¥Dispose of spent batteries properly.
AA 
Batteries
Rear cover
2. Do not force operations or use this device |
abnormally when opening or closing the FLIP |
DOWN PANEL. |
Be sure to unfold and read the next page.
Veuillez déplier et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
8 | ARX7570z | ARX7570z | 3 | ARX7570z | 4 |
