Clarion BD316 owner manual Radio Mode Operations

Setting the Z-enhancer

This unit comes with three types of sound tone

effects stored in memory. Select the one you prefer.

*The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button !, the tone effect changes in the following order. “Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z-ENHANCER 1”...

•Z-ENHANCER 1: bass emphasized

•Z-ENHANCER 2: treble emphasized

•Z-ENHANCER 3: bass and treble emphasized

•Z-EHCR OFF: no sound effect

Loudness Effect

In order to turn on/off the loudness effect, use the LD button 2 for 2 seconds or longer. Every time the LD button 2 is pressed and held for 1 second or longer, the loudness effect switches on and off.

*When the loudness effect is on, the display will show “LD”.

Switching the Clock Display

Every time the DISP button 6 is pressed, the display will change between the operation mode and the clock display.

Radio Mode Operations

FM Reception

For enhanced FM performance the ® tuner includes signal actuated stereo control and Multipath noise reduction circuits.

Listening to the Radio

1)Press the FNC button 3 to select the radio mode, then the radio will be on.

2)To select a preset band, press the BND but- ton @, then select one of the preset bands

such as FM1, FM2, FM3, or AM. Every time the BND button @ is pressed, the display will change as:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1

3)Press the SRCH Left/Right button #, then the station at which there is a broadcast will be selected (Seek selection).

Mute

Use this function to turn off the sound immedi- ately.

Press the MUTE button %. The sound turns off and “MUTE” appears on the display. Press the MUTE button again to cancel the mute mode.

Setting the Clock

1)Press the DISP button 6 to display the clock display.

2)Press and hold the DISP button 6 for 1 sec- ond or longer.

3)Press the SRCH Left button #, then set the current hour.

4)Press the SRCH Right button #, then set the current minute.

5)Press the DISP button 6, then the clock is set.

Notes:

•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.

•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.

Manual Tuning

1)Press the BND button @, then select FM1, FM2, FM3 or AM.

2)Press and hold the BND button @ for 1 sec- ond or longer, then the display will show “MANU”, which means that a manual selec- tion function is on.

3)Press the SRCH Left/Right button # and select the right station.

Seek Tuning

1)Press the BND button @, then select FM1, FM2, FM3 or AM.

2)If the “MANU” on the display is on, press and hold the BND button @ for 1 second or longer. When the “MANU” display is off, the Seek Selection function is on.

3)Press the SRCH Left/Right button #, then when it selects the station in which there is a broadcast, it automatically stops.

BD316 11