4. INTRODUCTION TO BLUETOOTH ® “PAIRING”

Pairing Sequence

Note:

•Please refer to Clarion Bluetooth® Audio Transmitter and Cradle for iPod owner’s manual for the Bluetooth® Audio Transmitter operation below.

Between Bluetooth® Audio/Mobile-phone Transceiver and Bluetooth® Audio Transmitter

1. Make sure the Transmitter is connected to an audio source.

2. Make sure the car stereo source mode is switched to ‘AUX’ mode.

3. Set the Transceiver unit in pairing mode. Please refer “Activating Bluetooth® Transceiver pairing mode” on page 17.

4. Set the Transmitter unit in pairing mode.

5. Music starts automatically upon successful pairing.

Notes:

•You do not have to enter a dedicated pin code for pairing these two devices, as you do with a mobile phone.

•During pairing mode, the Transceiver unit should show a slower alternate red/blue LED. Make sure that the Transmitter and Transceiver are not paired to any other Transceiver or Transmitter respectively.

•Please refer “Understanding The Transceiver Unit Indicators” on page 16 for further details.

BLT370 11