5.OPERATIONS FOR BLUETOOTH ® AUDIO/MOBILE- PHONE TRANSCEIVER UNIT

Turning on/off multiple re-connection mode

This function allows user to switch on or off the multiple re-connection mode.

ON: Multiple attempts are made to auto re-connect with the last paired mobile phone (HSP/HFP) when Transceiver is powered up.

OFF: Only 1 attempt is made to auto re-connect with the last paired mobile phone (HSP/HFP) when Transceiver is powered up.

1.When the Transceiver is powered on (no device connected), press and hold the [VOL +] and [VOL -] buttons simultaneously for 2 seconds or longer to toggle multiple re-connection mode on or off.

2.Auto connection will be observed in the next powered up of the Transceiver based on the multiple re-connection mode setting.

Notes:

•Factory default setting is ON.

•Please refer to chapter “Understanding the Transceiver Unit Indicators” on page 16 for more information about the LED status.

•The multiple re-connection attempts will be terminated if the Transmitter (DGL370) is connected.

•Resetting the Transceiver will not change the multiple re-connection mode to original setting.

18 BLT370