Clarion Compact Discs manual Setting the TV area, Setting the TV diver, TV Operations, English

TV Operations

English

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall.

1.Press the [ BAND ] button and select the desired TV band (TV1 or TV2).

2.To recall a stored TV station, press the desired [ DIRECT ] button to select that station.

∗Press and hold one of the [ DIRECT ] buttons for 2 seconds or longer to store the current station into preset memory.

Manual memory

1.Select the desired station with seek tuning, manual tuning or preset tuning.

2.Press and hold one of [ DIRECT ] buttons for 2 seconds or longer to store the current station into preset memory.

Auto store

Auto store selects 6 TV stations automatically and stores each one into preset memory.

If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.

1.Press the [ BAND ] button and select the desired TV band (TV1 or TV2).

2.Press and hold the [ P/A ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory.

1.Press the [ P/A ] button.

2.When the desired station is found, press the [P/A] button again to remain tuned to that station.

Note:

•Do not press and hold the [ P/A ] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.

Setting the TV area

When you select the TV area (TV reception area), the TV tuner area setting changes.

1.Press and hold the [ T ] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [ a ] or [ d ] button to select “TV AREA”.

3.Press the [ s ] button.

4.Press the [ w ] or [ z ] button to select the reception area.

5.Press the [ s ] button.

6.Press the [ T ] button to return to the previous mode.

Setting the TV diver

You can change the reception setting for the TV antenna con- nected to the TV tuner.

1.Press and hold the [ T ] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [ a ] or [ d ] button to select “TV DIVER”.

3.Press the [ w ] button to set to “DIVR ON” or press the [ z ] button to set to “DIVR OFF”.

●DIVR ON : Sets reception emphasizing the visual.

●DIVR OFF : Sets the diver setting to OFF.

4.Press the [ T ] button to return to the previous mode.

18 XMD3