![Basic Operations](/images/new-backgrounds/201842/20184213x1.webp)
Basic Operations
Adjusting the subwoofer
When you default select one of mode (LPF50, LPF80, LPF120)
∗The factory default setting is
1.Press the [
2.Press the [ w ] or [ z ] button increases or deceases the subwoofer volume.
Press and hold the [ w ] or [ z ] button automatically in- creases or deceases the subwoofer volume.
3.When the adjustment is complete, press the [
Adjusting the fader
1.Press the [
2.Press the [ w ] button emphasizes the sound from the front speaker, press the [ z ] button emphasizes the sound from the rear speaker.
∗The factory default setting is “FAD 0”. (Adjustment range: F12 to R12)
3.When the adjustment is complete, press the [
English
Adjusting the bass (Gain, Frequency, Q-curve)
This adjustment can be performed when the
1.Press the [
2.Press the [ w ] button emphasizes the bass. Press the [ z ] button attenuates the bass.
∗The factory default setting is “B<G 0>”. (Adjustment range:
3.Press the [ d ] or [ a ] button to select “B<F 60>”. Press the [ w ] or [ z ] button to select the frequency.
∗The factory default setting is “B<F 60>”.(Adjustment 60/100/200 Hz)
4.Press the [ d ] or [ a ] button to select “B<Q 1>”. Press the [ w ] or [ z ] button to select the
∗The factory default setting is “B<Q 1>”.(Adjustment 1/1.25/1.5/2)
Adjusting the Z-Enhancer Plus
1.Press the [ Z+ ] button and select the
2.Press the [
●When
●When “IMPACT 0” is selected, you can adjust the bass and treble in the range of
●When “EXCITE 0” is selected, you can adjust the bass and treble in the range of
∗Press and hold the [ Z+ ] button for 2 seconds or longer to change to the “CUSTOM” mode.
Bass/treble characteristics become flat and the indication “Z+FLAT” is shown in the display.
Press the [ Z+ ] button again to change to the “Z+ OFF” mode.
5.When the adjustment is complete, press the [
Adjusting the treble (Gain, Frequency)
This adjustment can be performed when the
1.Press the [
2.Press the [ w ] button emphasizes the treble. Press the [ z ] button attenuates the treble.
∗The factory default setting is “T<G 0>”. (Adjustment range:
3.Press the [ d ] or [ a ] button to select “T<F 10>”. Press the [ w ] or [ z ] button to select the frequency.
∗The factory default setting is “T<F 10>”.(Adjustment 10 kHz/15 kHz)
4.When the adjustment is complete, press the [
Adjusting the balance
1.Press the [
2.Press the [ w ] button emphasizes the sound from the right speaker, press the [ z ] button emphasizes the sound from the left speaker.
∗The factory default setting is “BAL 0”. (Adjustment range: L13 to R13)
3.When the adjustment is complete, press the [
Turning on/off MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗The factory default setting is off.
1.Press and hold the [
2.Press and hold the [
XMD3 11