English

5. OPERATIONS

Basic Operations

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting.

Turning on/off the power

1.Press the [SRC] button to turn on the power.

2.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.

∗If the display is changed by other button operation when the clock (CT) is displayed, the clock display returns automatically after the operation.

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

1.Each time you press the [Z] button, the tone effect changes in the following order:

Selecting a mode

1.Press the [SRC] button to change the operation mode.

Radio mode ➜ CD mode ➜ Radio mode...

Adjusting the volume

1.Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

“Z-ENHANCER 1” (bass emphasized) ➜ “Z-ENHANCER 2” (treble emphasized) ➜

“Z-ENHANCER 3” (bass and treble emphasized) ➜ “Z-EHCR OFF” (no sound effect) ➜ “Z-ENHANCER 1”...

Turning on/off MAGNA BASS EXTEND

1.Press and hold the [A-M] button for 1 second or longer to turn the MAGNA BASS EXTEND and “M-B EX” in the display lights on or off.

Audio Mode Adjustments

1.Press the [A-M] button to select the adjustment mode. The mode switches as follows each time the [A-M] button is pressed: BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous mode

∗When the Z-Enhancer function is turned on, BASS (bass) and TRE (treble) cannot be selected.

2.Turning the [ROTARY] knob to adjust the selected audio mode.

• BASS (bass): Adjustment range; –7 to +7

• TREB (treble): Adjustment range; –7 to +7

• BAL (balance): Adjustment range; L13 to R 13

• FAD (fader): Adjustment range; F12 to R12

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

∗The display returns to the previous mode 7 seconds after the adjustment.

CT (Clock Time) function

1.Press and hold the [BND] button, and then press the [DISP] button, the display switches to CT (Clock Time) from RDS data.

Triggered audio mute for cellular telephones

This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.

1.Press and hold the [BND] button, and then

press the [] to select the “TEL MUTE” or “TEL OFF”.

TEL MUTE : mutes the audio sound.

TEL OFF : does not mute the audio sound.

Illumination dimmer function

When the illumination line of this unit is connected with the car-side illumination signal line, the display illumination of this unit dims in connection with turning on the car-side illumination.

Switching display

1.Press and hold the [BND] button, and then press the [DISP] button to select the desired display.

The display switches in the following order: Main display ➜ Clock (CT) display ➜ Main …

Turning the screen saver function on or off

1.Press the [SS] button while keeping the [BND] button pressed, to turn the screen saver function on or off.

6 DB158R/BD159R