Clarion DB225 owner manual Radio Mode Operations

Setting the Z-enhancer

This unit comes with three types of sound tone

Radio Mode Operations

effects stored in memory. Select the one you prefer.

* The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button 5, the

FM Reception

For enhanced FM performance the

®

tone effect changes in the following order.

“Z-ENHANCER 1”➜ “Z-ENHANCER 2”➜

“Z-ENHANCER 3”➜ “Z-EHCR OFF”➜

“Z-ENHANCER 1”...

• Z-ENHANCER 1: bass emphasized

• Z-ENHANCER 2: treble emphasized

• Z-ENHANCER 3: bass and treble emphasized

• Z-EHCR OFF: no sound effect

Switching the Clock Display

Press and hold the BND button 0, and then press the DISP button 9 to swith between the operation mode and the clock display.

Setting the Clock

1)Press and hold the BND button 0, and then press the DISP button 9 to display the clock display.

2)Press and hold the BND button 0, and then press the DISP button 9 for 2 seconds or longer.

3)Press the SRCH Up button ´, then set the current hour.

4)Press the SRCH Down button ´, then set the current minute.

5)Press the BND button 0, then the clock is set.

Notes:

•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.

•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.

tuner includes signal actuated stereo control and Multipath noise reduction circuits.

Listening to the Radio

1)Press the FNC button 4 to select the radio mode, then the radio will be on.

2)To select a preset band, press the BND but- ton 0, then select one of the preset bands

such as FM1, FM2, FM3, FM4, or AM. Every time the BND button 0 is pressed, the dis- play will change as:

FM1 FM2 FM3 FM4 AM

3)Press the SRCH Up/Down button ´, then the station at which there is a broadcast will be selected (Seek selection).

Manual Tuning

1)Press the BND button 0, then select FM1, FM2, FM3, FM4 or AM.

2)Press and hold the BND button 0 for 2 sec- onds or longer, then the display will show “MANU”, which means that a manual selec- tion function is on.

3)Press the SRCH Up/Down button ´ and select the right station.

Seek Tuning

1)Press the BND button 0, then select FM1, FM2, FM3, FM4 or AM.

2)If the “MANU” on the display is on, press and hold the BND button 0 for 2 seconds or longer. When the “MANU” display is off, the Seek Selection function is on.

3)Press the SRCH Up/Down button ´, then when it selects the station in which there is a broadcast, it automatically stops.

English

DB225 9