English

Basic Operations

Adjusting the bass

Turning on/off MAGNA BASS

1.

Press the [A-M] button and select “BASS”.

EXTEND

2.

Turning the [ROTARY] knob clockwise em-

To adjust the MAGNA BASS EXTEND

 

phasizes the bass; turning it counterclock-

The MAGNA BASS EXTEND does not adjust

 

wise attenuates the bass.

 

the low sound area like the normal sound ad-

 

∗ The factory default setting is “0”. (Adjustment

 

justment function, but emphasizes the deep

 

range: –7 to +7)

bass sound area to provide you with a dynamic

3.

When the adjustment is complete, press the

sound.

 

[A-M] button several times until the function

∗ The factory default setting is off. Press and hold

 

mode is reached.

the [A-M] button for 1 second or longer to turn the

 

 

MAGNA BASS EXTEND and “M-B EX” in the dis-

 

 

play lights on or off.

Adjusting the treble

1.Press the [A-M] button and select “TREB”.

2.Turning the [ROTARY] knob clockwise em- phasizes the treble; turning it counterclock- wise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: –7 to +7)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

CT (Clock Time) function

The CT function enables you to display clock time only when CT data is received.

Press and hold the [BND] button, and then press the [DISP] button, the display switches to CT (Clock Time).

∗When no CT data is received, “CT––:––” appears in the display.

Note:

•There are some countries and stations where clock time data are not transmitted. In some ar- eas, the CT may not be displayed correctly.

Triggered audio mute for cellular telephones

This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.

∗This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

Adjusting the fader

1.Press the [A-M] button and select “FAD”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

∗The factory default setting is “TEL OFF”.

Press and hold the [BND] button, and then press the [s] to select the “TEL ON” or “TEL OFF”.

TEL ON: mutes the audio sound.

TEL OFF: does not mute the audio sound.

Illumination dimmer function

When the illumination line of this unit is connected with the car-side illumination signal line, the display illumination of this unit dims in connection with turning on the car-side illumination.

10 DB248R/DB148R/BD149RG