Basic Operations

English

Turning on/off MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment func- tion, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗The factory default setting is off.

Press and hold the [A-M] button for 1 second or longer to turn the MAGNA BASS EX and “M-B EX” in the display lights on or off.

Switching display

Press and hold the [BND] button, and then press the [DISP] button to select the desired display.

TEL MUTE: mutes the audio sound.

TEL OFF: does not mute the audio sound.

∗During telephone interrupt, the display shows "TEL"

Illumination dimmer function

When the illumination line of this unit is connected with the car-side illumination signal line, the display illumination of this unit dims in connection with turning on the car-side illumination.

The display switches in the following order:

Main Display Æ Clock (CT) Display Æ

Main Display …

∗If the display is changed by other button operation when the clock (CT) is displayed, the clock display returns automatically after the operation.

CT (Clock Time) function

The CT function enables you to display clock time only when CT data is received.

Press and hold the [BND] button, and then press the [DISP] button, the display switches to CT (Clock Time).

∗When no CT data is received, “CT––:––” appears in the display.

Note:

•There are some countries and stations where clock time data are not transmitted. In some areas, the CT may not be displayed correctly.

Turning the screen saver function on or off

This unit is provided with the screen saver func- tion. You can turn on or off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is on.

Press the [SS] button while keeping the [BND] button pressed, to turn the screen saver function on or off.

Triggered audio mute for cellular telephones

This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.

∗This function is not compatible with all cellular tele- phones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

∗The factory default setting is “TEL OFF”.

Press and hold the [BND] button, and then press the [ ] to select the “TEL MUTE” or “TEL OFF”.

10 DB258R