Basic Operations
Turning on/off MAGNA BASS EX | Adjusting clock setting |
The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗The factory default setting is off.
Press and hold the
Switching display
Press the [D] button to select the desired display.
The display switches in the following order:
Main Display ➜ Clock Display ➜
Main Display …
∗If the display is changed by other button operation when the clock is displayed, the clock display returns automatically after the operation.
1.Press the [D] button and press [å]/[∂] button to select “CLOCK (E)”.
2.Press [ ] button to start clock adjustment, the HOUR is selected and blinking by default.
3.Press [å]/[∂] button to toggle HOUR and MINUTE selection.
4.Turn the [ROTARY] knob clockwise to increases hour/minute or counterclockwise to decrease hour/minute.
5.Press [ ] button to confirm the clock setting the clock will blink for 2 seconds and return to “CLOCK(E)”.
Note:
•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.
English
Illumination dimmer function
When the illumination line of this unit is connected with the
ADJ mode adjustment
1.Press [D] button more than 1 second at POWER ON mode to enter ADJ mode, the previous selected ADJ items will be called out.
2.Press [D] button again at ADJ mode will cancel ADJ mode and return to previous display.
3.Press [SRC] button will also release ADJ mode.
4.ADJ mode will also be released when current source mode is changed. (Mode changes of LOADING, EJECT, interruption and interruption release)
5.Press [å]/[∂] button to switch the ADJ mode items,
CLOCK (E) SCRN SVR
Adjusting screen saver setting
1.Press the [D] button and press [å]/[∂] button to select “SCRN SVR”.
2.“SS ON” or “SS OFF” will be display after 2 seconds.
3.Turn the [ROTARY] knob clockwise to turn on the screen saver or counterclockwise to turn off the screen saver.
4.If screen saver setting is set to on, screen saver will be activated after 30 seconds of no key operation.
Adjusting auto-scroll setting
1.Press the [D] button and press [å]/[∂] button to select
2.“SCRL ON” or “SCRL OFF” will be display after 2 seconds.
3.Turn the [ROTARY] knob clockwise to turn on the
4.If
6.The ADJ mode title will be display for 2 seconds before showing the ADJ mode setting.
DB266MP 11