English
7. REMOTE CONTROL
If you buy the
Signal transmitter
[SRC] | [BND] | |
| [ | ] |
[ ], [ ] | [ | ], [ ] |
| ||
[MUTE] | [DISP] | |
[ISR] | [RDM] | |
[SCN] | [RPT] | |
|
|
Inserting the Battery
1 Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration.
2 Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
Notes:Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials. Always follow these safety precautions:
•Use only the designated battery.
•When replacing the battery, insert properly, with +/– polarities oriented correctly.
•Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery.
•Dispose of used batteries properly.
Insertion guide
R |
|
|
C 2 |
| |
| 0 | |
|
| 2 |
|
| 5 |
8 DB266MP