Operations Common to Each Mode
Operations Common to Each Mode
English
About gain (G)
This function allows you to adjust how much the output level is to be lowered.
●Characteristics during gain adjustment
LOW | MID | HIGH | 0dB | |
|
|
|
|
About phase (PHASE)
The factory default setting is "NOR" (forward phase). Try switching between "NOR" (forward phase) and "REV" (reverse phase) and select the setting that sounds most natural to you.
Adjusting the position (TIME ALIGN)
●About the time alignment function
This function allows you to adjust the speakers so that any listener in the car can obtain the same sound effect from the speakers.
∗This item can be adjusted when the Audio mode is the Standard mode or the Multi mode.
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select "SOUND".
3. Press the [s] button.
4. | Press the [ | ] or [ | ] button to select "TIME | |
| ALIGN". |
|
|
|
5. | Press the [ | ] or [ | ] button to select " | |
| FRONT | " or " | HIGH | ". |
∗Select "
FRONT
" when the Audio
mode is the Standard mode, and "
HIGH
" when the Audio mode is the Multi mode.
6. Press the [ ] or [ ] button to select the speaker to adjust.
In the Standard mode: | In the Multi mode: |
FRONT | HIGH |
� |
|
� |
|
� |
|
FRONT | HIGH |
� |
|
� |
|
� |
|
FRONT | MID |
� |
|
� |
|
� |
|
FRONT | MID |
� |
|
� |
|
� |
|
REAR | LOW |
� |
|
� |
|
� |
|
REAR | LOW |
� |
|
� |
|
� |
|
� |
|
� |
|
� |
|
7. Press the [ ] button. The setting value is displayed.
Blinking
8.Press the [s] button. The setting value blinks.
9.Press the [
] or [
] button to set the distance from the speaker up to the listener.
∗The adjustment range is 0 cm to 512.4 cm (in about 0.7 cm steps).
∗The range can be adjusted in about 7 cm steps by holding down the [
] or [
] buttons.
∗For details, see "Appendix : Time Alignment List" (page 32).
Adjusting P.EQ
●About P.EQ (Parametric Equalizer)
This function allows you to correct in detail all frequency levels by a smooth curve by correcting frequencies matched to the type of your car.
∗This can be adjusted when the Equalizer mode is set to "P.EQ".
∗This can be adjusted when the Audio mode is the Standard mode or the Multi mode.
1. | Press the [ADJ] button. | ||
2. | Press the [ | ] or [ | ] button to select |
| "SOUND". |
|
|
3. | Press the [s] button. | ||
4. | Press the [ | ] or [ | ] button to select "P.EQ". |
5. | Press the [ | ] button. | |
6. | Press the [ | ] or [ | ] button to select the |
adjustment item.
∗Pressing the [ROTARY] knob while the L/R channel is selected turns the mute function of the selected channel ON/OFF.
Each press of the button switches the setting as follows.
P.EQ ON/OFF: ON/OFF
P.EQ LEFT/RIGHT: Left channel/Right channel
BAND: band (1 to 5)
fo: frequency (BAND 1,2,3 : 50 Hz to 20 kHz) (BAND 4,5 : 630 Hz to 20 kHz)
7.Press the [s] button. The setting value blinks.
8. Press the [ ] or [ ] button to adjust the setting.
9.When you have finished the adjustment, press the [s] button to return to the screen in step 6. This sets the setting value.
10.Repeat steps 6 to 9 to adjust each of the adjustment items.
11.Press the [ADJ] button to return to the previous mode.
English
*The mute function of a selected speaker can be turned ON/OFF by pressing the [ROTARY] knob while the speaker is selected.
Each press of the button switches the setting as follows.
10.When you have finished the adjustment, press the [s] button to return to the screen in step 7. This sets the setting value.
11.Press the [
] button to return to the screen in step 6.
12.Repeat steps 6 to 11 to adjust the position of each speaker.
13.Press the [ADJ] button to return to the previous mode.
G:gain
Q:
C:copy
20 | DRZ9255 | DRZ9255 | 21 |