Basic Operations
Radio Operations
Turning on/off the display | Adjusting the bass/treble |
FM reception
●Step tuning:
English
You can turn the display ON/OFF by holding the
You can also turn the display ON by pressing the [DISP] button while the display is OFF.
Adjusting the tone
Press the
∗"BASS" and "TREB" are displayed when "BASS/ TREB" are selected at EQ SELECT.
●When “STD” is set
●When “DIRECT” is set
This function is used to set the tone in more detail for listening.
•The tone can be adjusted when the Equalizer mode is set to "BASS/TREB".
∗This can be adjusted when the Audio mode is the Standard mode or the Multi mode.
∗The factory default setting is "0 dB".
1.Press the
2. Press the [ ] or [ ] button to adjust the output volume.
∗ The adjustment range is
3.Press the
For enhanced FM performance the | ® |
tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Listening to the radio
1.Press the [FUNC] button and select the radio mode. The frequency appears in the display.
2.Press the [BAND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the [A] or [D] button to tune in the desired station.
Tuning
Press the [A] or [D] button to manually tune in a station.
Recalling a preset station
A total of 24 preset positions
1.Press the [BAND] button and select the desired band (FM or AM).
2.Press the corresponding [DIRECT] button to recall the stored station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
Manual memory
English
“N-FAD VOL” ➜“BAL” ➜“FADER” ➜
Last function mode.
●When “MULTI” is set
“SW-VOL” ∗1 ➜ “BASS” ∗2 ➜ “TREBLE” ∗2 ➜ “BAL” ➜ Last function mode.
∗1 The item can be adjusted when the
∗2 The item can be adjusted when "EQ SELECT" in the Adjust mode is set to "BASS/TREB".
Adjusting the volume of sub- woofer/non-fader output
These items can be adjusted when the sub-
∗The factory default setting is "0.0 dB".
1.Press the
∗Select
2. Press the [ ] or [ ] button to set the output volume.
∗The adjustment range is
3.Press the
Adjusting the balance/fader
•"FADER" (fader) can be adjusted when the Audio mode is the Standard mode or the Direct mode.
∗The factory default setting is "0".
1.Press the
2. Press the [ ] or [ ] button to adjust the volume.
●Adjusting the balance (volume of the left and right speakers)
To enhance the left side, press the [ ] button. To enhance the right side, press the [ ] button.
∗The adjustment range is L13 to R13.
●Adjusting the fader (volume of the front and rear speakers)
To enhance the rear side, press the [ ] button.
To enhance the front side, press the [ ] button.
∗ The adjustment range is R12 to F12.
3.Press the
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press the [BAND] button and select the desired band (FM or AM).
∗If “MANU” is lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the [A] or [D] button to automatically seek a station.
When the [D] button is pressed, the station is sought in the direction of higher frequencies; if the [A] button is pressed, the station is sought in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BAND] button and select the desired band (FM or AM).
∗If “MANU” is not lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune in a station.
●Quick tuning:
Press and hold the [A] or [D] button for 1 second or longer to tune in a station.
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press the [BAND] button and select the desired band (FM or AM).
2.Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1.Press the [P/A] button.
2.When a desired station is tuned in, press the [P/A] button again to continue receiving that station.
Note:
•Be careful not to press and hold the [P/A] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
12 | DRZ9255 | DRZ9255 | 13 |