Clarion DRZ 9255 6. OPERATIONS, Functions of Remote Control Unit Buttons, Basic Operations, Adjusting the volume, Turning on/off the power, Selecting a mode, Mute the sound

English

Functions of Remote Control Unit Buttons

Mode	Radio	CD	CD changer	TV
Button			DVD changer

[FNC]	Switches among radio, CD, CD changer, DVD changer, TV and AUX.

6. OPERATIONS

Basic Operations	Note:Be sure to read this chapter referring to the front diagrams of
	chapter “3. CONTROLS” on page 5 (unfold).

English

	[BND]		Switches reception	Plays the first track.	Moves the next disc in	Switches reception
			band.	Top play.	increasing order.	band.
[	] , [	]	Increases and decreases volume (in all modes).
[	] , [	]	Tunes in the desired	Moves tracks up and down.		Tunes in the desired
			station.	When pressed and held for 1 second:		TV station.
				Fast-forward/fast-backward.		�
	[	]	No function.	Switches between playback and pause.		Switches between TV


						and VTR.

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

∗The volume level is from ---- (minimum) to +6dB (maximum).

∗Holding down the [ROTARY] knob switches the volume from 1dB steps to 0.5dB steps.

[MUTE]	Turns mute on and off. Holding down the button for about one second changes the volume from 1dB
	steps to 0.5dB steps. �
[DISP]	Switches among main display, sub display, clock display.
[SCN]		Scan play.	Scan play.
[1]			When pressed and
			held for 1 second:
			Disc scan play.
		Repeat play.	Repeat play.
[RPT]		Repeat play.	Repeat play.
[2]			When pressed and
			held for 1 second:
	Recalls the station in		Disc repeat play.	Recalls the station in
	the memory.		Random play.	the memory.
[RDM]	the memory.			the memory.
[RDM]	When pressed and	Random play.		When pressed
[3]	held for 1 second:		When pressed and	and held for 1 second:
	Manual memory.		held for 1 second:	Manual memory.
			Disc random play.
			[4]:Disk down.
[DISC]		No function.	[4]:Disk down.
[4][6]			[6]:Disk up.

[5]		No function.	No function.
[ ][ ][ ][ ]	Select items in the Adjust mode.
[PS/AS]	Preset scan.	Scan play.	Scan play.	Preset scan.
	When pressed and			When pressed and
	When pressed and			held for 2 seconds:
	held for 2 seconds:			held for 2 seconds:
	held for 2 seconds:			Auto store.
	Auto store.			Auto store.
	Auto store.
[ADJ]	Enters the adjust	Enters the adjust	Enters the adjust	Enters the adjust
	mode.	mode.	mode.	mode.
	mode.	When pressed and	When pressed and
		When pressed and	When pressed and
		held for 1 second:	held for 1 second:
		Title scroll.	Title scroll.
			(This function is only
			for CD changer.)
[A-M]	Adjusts the tone, the balance, and the fader.
	When pressed and held for 1 second: Display off.

∗Some of the corresponding buttons on the main unit and remote control unit have different functions.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [FUNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FUNC] button for 1 second or longer to turn off the power for the unit.

Note:

•System check

The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM CHK” and “Push POWER” appear in the display alternately, so press the [FUNC] button. The system check starts within the unit. When the system check is complete, press the [FUNC] button again.

Selecting a mode

1.Press the [FUNC] button to change the operation mode.

2.Each time you press the [FUNC] button, the operation mode changes in the following order:

Radio mode ➜CD mode ➜ CD changer mode ➜ DVD changer mode ➜ TV mode ➜ AUX mode ➜ Radio mode...

∗External equipment not connected with CeNET is not displayed.

Mute the sound

To mute the volume during playback, press the [ROTARY] knob.

Switching the display

Press the [DISP] button to select the desired display.

Each time you press the [DISP] button, the display switches in the following order:

Main display

Sub display

Clock display

Main display

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.

DRZ9255