English

8. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 3.

!CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the carʼs battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [SRC] button.

2.The illumination and display on the unit light up. The unit automatically remem- bers its last operation mode and will au- tomatically switch to display that mode.

3.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.

Notes:

•System check

The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, the “SYSTEM CHK” appears in the dis- play, then the unit returns to the clock display mode.

The system check starts within the unit. When the system check is complete, press the [SRC] button again.

Selecting a mode

1.Press the [SRC] button to change the operation mode.

2.Each time you press the [SRC] button, the op- eration mode changes in the following order:

Radio mode

Satellite mode CD/MP3/

WMA mode

CD changer mode DVD

changer mode

TV mode Radio mode...

∗External equipment not connected with CeNET is not displayed.

Note:

•If the CD mode is selected when no disc is inserted, the display shows “NO DISC”.

Switching the display

Press the [D] button to select the desired display.

Each time you press the [D] button, the display switches in the following order:

Main display Title display Clock display Main display

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functionʼs display, then revert back to the preferred display several seconds after the adjustment.

∗When you have entered a title in a CD/MP3/WMA, it appears in the title display. If you have not en- tered a title, “NO TITLE” appears in the title display instead.

For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counter-clockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maxi- mum).

Audio mode adjustments

1.Press the [A-M] button to select the adjustment

mode. The mode switches as follows each time the [A-M] button is pressed:

BASS TREB BAL FAD Previous mode

2.Turning the [ROTARY] knob to adjust the se- lected audio mode.

12 DXZ365MP