Radio Mode Operations

English

Listening to the radio

 

 

1.

Press the [SRC] button and select the radio

 

 

mode, then the radio will be on.

 

2.

To select a preset band, press the [BND]

 

 

button, then select one of the preset bands

 

 

such as FM1, FM2, FM3 or AM. Every time

 

 

the [BND] button is pressed, the display will

 

 

change as:

 

 

 

 

 

FM1 FM2

FM3 AM FM1...

 

3.

Press the [

 

 

,

 

] lever upward or downward

 

 

 

 

 

 

to tune in the desired station.

Seek tuning

1.Press the [BND] button and select the desired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tuning is now available.

2. Press the [

 

,

 

] lever upward or downward

 

 

to start automatic station tuning.

When the lever is pressed upward, search will be performing in the direction of higher frequencies. When the lever is pressed downward, search will be performed in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Press the [BND] button and select the desired band (FM or AM).

∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning is now available.

2. Tune into a station.

• Quick tuning:

Press the [ , ] lever upward or downward and hold in position for 1 second or longer to begin station tuning.

• Step tuning:

Press the [ , ] lever upward or downward to perform manual tuning.

Preset memory function

Preset memory function can store up to 24 stations:

six stations for each of FM1, FM2, FM3 and AM.

Manual memory function

1.Press the [BND] button, to select a band you want to store in the memory.

2. Press the [

 

,

 

] lever to tune into a desired

 

 

station.

 

 

 

 

3.Press and hold one of the [DIRECT] button for 2 seconds or longer to store the current station into preset memory.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.

1.Press the [BND] button and select the desired band (FM or AM).

2.Press and hold the [PS/AS] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.

1.Press the [PS/AS] button.

2.When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station.

14 DXZ365MP