English
6. OPERATIONS
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).
Basic Operations
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Turning on/off the power
Note:
•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Press the [SRC] button.
2.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.
Note:
•System check
The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, the
Selecting a mode
1.Press the [SRC] button to change the operation mode.
2.Each time you press the [SRC] button, the operation mode changes in the following order:
Radio ➜ (Satellite radio) ➜ CD/MP3/WMA
➜(iPod BB) ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
∗External equipment not connected with CeNET is not displayed.
Adjusting the volume
1.Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.
∗The volume level is from 0 (minimum) to 33 (maximum).
Switching the display
Press the [D] button to select the desired display.
∗If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
For details, refer to the subsection “Turning the screen saver function on or off” in section “Operations Common to Each Mode”.
10 DXZ275MP/DXZ375MP