Basic Operations

English

●Adjusting the fader

2-1. Select “FADER”.

3-1. Press the [w] or [z] button to adjust the balance of the rear and front speakers.

∗The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))

●Setting the subwoofer

(DXZ375MP only)

You can set the low pass filter of subwoofer.

2-1. Select “REAR/S-W”.

3-1. Each time you press the [w] or [z] button to select the setting, the setting changes in the following order:

“LPF 120” ↔ “LPF 80” ↔ “LPF 50” ↔ “REAR”

∗The factory default setting is “REAR” (rear).

●Adjusting the subwoofer output volume (DXZ375MP only)

●Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.

∗The factory default setting is “OFF” (off).

1.Press and hold the [] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” lights in the display.

2.Press and hold the [] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. “M-B EX” goes off.

Note:

•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.

You can adjust the volume output from the unit’s subwoofer output terminal.

This adjustment can be performed only when the “REAR/S-W” is set to “LPF 120”, “LPF 80” or “LPF 50”.

2-1. Select “S-W VOL”.

3-1. Press the [w] or [z] button to increases

or decreases the subwoofer volume.

∗The factory default setting is “0”. (Adjustment range: +6 to –6)

∗When the volume level is more than 30, the subwoofer volume adjustment value can not reach +6.

●Adjusting the high pass filter (DXZ375MP only)

2-1. Select “HPF”.

3-1. Each time you press the [w] or [z] button to select the setting.

The setting changes in the following order: “120Hz” ↔ “THROUGH”

∗The factory default setting is “THROUGH” (through).

12 DXZ275MP/DXZ375MP