Operations Common to Each Mode
Entering MESSAGE INFORMATION | Setting the button illumination |
Message up to 30 characters long can be stored in memory and displayed for any mode.
∗The factory default setting is “WELCOME TO CLARION”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “INPUT”.
3.Press the [ ] button.
4.Press the [a] or [d] button to move the cursor.
5.Press the [D] button to select a character. Each time you press the [D] button, the character changes in the following orders:
Capital letters ➜ Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters…
6.Turn the [ROTARY] knob to select the desired character.
7.Repeat step 4 to 6 to enter up to 30 characters for message.
8.Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message.
9.Press the [T] button to return to the previous mode.
Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following order:
CLR SCAN ➜ RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜ YELLOW ➜
LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR
SCAN…
●Setting CLR SCAN mode
As selecting “CLR SCAN”, the color automatically changes in the following order:
RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜ YELLOW ➜
∗The factory default setting is “CLR SCAN”.
∗During change the color’s name is not appear.
∗After 3 second the color changes to the other.
●Setting USER mode
The factory default setting is “R>8 G>3”.
As selecting “USER”, press and hold the
[COLOR] button 1 second or longer “R>8 G>3” appears in the display.
1.Press the [a] or [d] button to move the cursor.
2.Turn the [ROTARY] knob to select from 0 to 8.
3. Press and hold the [ ] button for 2
seconds or longer to store the color in memory and cancel setting mode.
English
DXZ538R 23