Basic Operations

• EXCITE

: bass and treble empha-

 

sized mid de-emphasized

• CUSTOM

: user custom

• Z+ OFF

: no sound effect

Adjusting the Subwoofer

∗The factory default setting is “S-VOL 0”

When you select one of the mode (LPF 50, LPF 80, LPF 120).

1.Press the [A-M] button, “S-VOL 0” appears in the display.

2.Turn the [ROTARY] knob to select from –6 to +6.

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “B-BOOST” is set

“S-VOL 0” ➜ “B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “IMPACT” is set

“S-VOL 0” ➜ “IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “EXCITE” is set

“S-VOL 0” ➜ “EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “CUSTOM” is set

“S-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜

“BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “Z+ OFF” is set

“S-VOL 0” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

Note:

•As subwoofer is effective, “S-VOL 0” can be selected.

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “B<G 0>”. (Ad- justment range: –6 to +6)

3.Press the [d] or [a] button to select “B<F 60>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “B<F 60>”.(Ad- justment 60/100/200 Hz)

4.Press the [d] or [a] button to select “B<Q 1>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

∗The factory default setting is “B<Q 1>”.(Ad- justment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the treble (Gain,

Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “TREBLE”.

2.Turning the [ROTARY] knob clockwise em- phasizes the treble; turning it counterclock- wise attenuates the treble.

∗The factory default setting is “T<G 0>”. (Ad- justment range: –6 to +6)

3.Press the [d] or [a] button to select “T<F 10>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “T<F 10>”.(Ad- justment 10 kHz/15 kHz)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FAD 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

DXZ538R 13

English