Operations Common to Each Mode
English
7.Turn the [ROTARY] knob to select the de- sired character.
8.Repeat step 5 to 7 to enter up to 30 charac- ters for message.
9. Press and hold the [ 
] button for 2 sec-
onds or longer to store the message in memory and cancel input message.
10.Press the [T] button to return to the previous mode.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “DIMMER”.
3.Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”.
4.Press the [T] button to return to the previous mode.
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message display ON or OFF.
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “MESSAGE”.
3.Turn the [ROTARY] knob clockwise or counter- clockwise to set the message display ON or OFF.
4.Press the [T] button to return to the previous mode.
Setting the method for title scroll
Set how to scroll in
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “AUTO SCRL”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
● ON:To scroll automatically.
●OFF:To scroll just 1 time when the title was changed or the title key was pressed.
4.Press the [T] button to return to the previous mode.
Dimmer control
You can set the dimmer control “ON” or “OFF”.
∗The factory default setting is “ON”.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “8”. (Adjustment level: 1 to 16)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CONTRAST”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
Setting LOW PASS FILTER
∗The factory default setting is “LPF 120Hz”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
LPF REAR ➜ LPF 50Hz ➜ LPF 80Hz ➜LPF 120Hz4.Press the [T] button to return to the previous mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.
∗The factory default setting is “MID”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
22 DXZ546MP