Operations Common to Each Mode
2.Press the [a] or [d] button to select “AUX SENS”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “HIGH”, “MID” or “LOW”.
4.Press the [T] button to return to the previous mode.
Setting the clock
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CLOCK 
”.
3. Press the [ | ] button. |
4.Press the [a] or [d] button to select the hour or the minute.
5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.
∗ The clock is displayed in
6. Press the [ | ] button to store the time into |
memory. |
|
7.Press the [T] button to return to the previous mode.
Note:
•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is re- set. While setting the clock, if another button or operation is selected, the clock set mode is can- celed.
Entering titles
Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows.
Mode | Number of titles |
CD mode | 50 titles |
TV mode | 20 titles |
Tuner mode | 30 titles |
| CD changer mode | Number of titles |
DCZ625 connected | 100 titles |
CDC655Tz connected | 100 titles |
CDC1255z connected | 50 titles |
1.Press the [FNC] button to select the mode you want to enter a title (TUNER, CD, CD changer or TV).
2.Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to enter the title.
3.Press the [DISP] button and display the main.
4.Press the [T] button.
5.Press the [a] or [d] button to move the cursor.
6.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers and Symbols ➜ Umlaut ➜ Capital letters...
7.Turn the [ROTARY] knob to select the de- sired character.
8.Repeat steps 5 to 7 to enter up to 10 charac- ters for the title.
9. Press and hold the [ 
] button for 2 seconds or longer to store the title into memory and cancel title input mode.
Clearing titles
1.Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to clear the title.
2.Press the [DISP] button and display the main.
3.Press the [T] button.
The display switches to the title input display.
4.Press the [BND] button.
5. Press and hold the [ 
] button for 2 sec-
ond or longer to clear the title and cancel title input mode.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular tele- phones Contact your local authorized Clarion dealer for information on proper installation and compat- ibility.
AUX function
This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.
English
DXZ546MP 23