Clarion DXZ735MP Radio Operations, Adjusting the balance, Adjusting the fader, FM reception

English	Basic Operations
	Adjusting the balance
	1.	Press the [A-M] button and select “BAL 0”.
	2.	Turning the [ROTARY] knob clockwise em-
		phasizes the sound from the right speaker;
		turning it counterclockwise emphasizes the
		sound from the left speaker.
		∗ The factory default setting is “BAL 0”. (Adjust-
		ment range: L13 to R13)
	3.	When the adjustment is complete, press the
		[A-M] button several times until the function
		mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound ad- justment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗ The factory default setting is off.

1.Press and hold the [A-M] button for 1 sec- ond or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” lights in the dis- play.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EX- TEND effect. “M-B EX” goes on in the dis- play.

Adjusting the subwoofer

When you default select one of mode (LPF50Hz, LPF80Hz, LPF120Hz).

∗The factory default setting is “SW-VOL 0”. (Adjustment range: –6 to +6)

1.	Press the [SW-VOL] button to select the
	subwoofer volume increases or decreases.
2.	Press and hold the [SW-VOL] button, the
	subwoofer volume automatically increases or
	decreases.

Radio Operations

FM reception

For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.

Changing the reception area

This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.

●Setting the reception area

1.Press the [BND] button and select the de- sired radio band (FM or AM).

2.While pressing the [A-M] button and hold the number “2” of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA.

3.While pressing the [A-M] button and hold the number “1” of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from outside the USA to inside the USA.

∗Any station preset memories are lost when the reception area is changed.

Listening to the radio

1.Press the [FNC] button and select the radio mode. The frequency in the display.

2.Press the [BND] button and select the radio band. Each time the button is pressed, the ra- dio reception band changes in the following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3.Press the [a] or [d] button to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the de- sired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.

14 DXZ735MP