DXZ745MP 23
English
Dimmer level
You can adjust the reduced illumination level of
the dimmer.
The factory default setting is “LV3”.
(Adjustment range is LV1 to LV5)
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select the
“ÅÅ
ÅÅ
ÅDIMMER LVÎÎ
ÎÎ
Δ.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the reduced illumina-
tion level of the dimmer.
● LV1 to LV5:
The dimmer operation is performed depend-
ing on the set level LV1 to LV5.
● OFF:
No dimmer operation is performed.
4. Press the [T] button to return to the previous
mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
The factory default setting is “8”. (Adjustment level: 1
to 18)
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
“ÅÅ
ÅÅ
ÅCONTRAST ÎÎ
ÎÎ
Δ.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the contrast.
4. Press the [T] button to return to the previous
mode.
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“ÅÅ
ÅÅ
ÅBLINK LEDÎÎ
ÎÎ
Δ.
3. Turn the [ROTARY] knob clockwise to set this
function “ON” or turn it counterclockwise to
switch this function “OFF”.
4. Press the [T] button to return to the previous
mode.
Operations Common to Each Mode
Setting the Subwoofer
You can set the subwoofer on or off.
The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“ÅÅ
ÅÅ
ÅSUB-W ÎÎ
ÎÎ
Δ.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
4. Press the [T] button to return to the previous
mode.
Setting LOW PASS FILTER
The factory default setting is “THRGH” (Through).
If subwoofer function is set “ON”, “LOW PASS FIL-
TER” can be selected.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“ÅÅ
ÅÅ
ÅSUB-W LPFÎÎ
ÎÎ
Δ.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4. Press the [T] button to return to the previous
mode.
Setting the external amplifier
The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“��Å
ÅÅ
ÅAMP-CANCLÎÎ
ÎÎ
Δ.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
● ON:
Use with connected AMP.
● OFF:
Use with inside AMP.
4. Press the [T] button to return to the previous
mode.