Clarion DXZ825 owner manual Volume, Adjusting the tone, Adjusting the bass, Adjusting the MID

English

Basic Operations

Setting the Beat EQ		Adjusting the non fader output
This unit are provided with 5 types of sound tone ef-		volume
fects stored in memory. Select the one you prefer.		You can adjust the volume output from the unit’s
∗ The factory default setting is “USER CUSTOM”.
		non fader output terminal.
Each time you press the [BEQ] button, the tone		1.	Press the [A] button and select “NON-FAD
effect changes in the following order:			VOL”.
“BASS BOOST”	➜ “IMPACT” ➜ “EXCITE” ➜	2.	Turning the [ROTARY] knob clockwise in-
“USER CUSTOM” ➜ “TONE BYPASS” ➜			creases the output volume; turning it counter-
“BASS BOOST” ...			clockwise decreases the output volume.
• BASS BOOST	: bass emphasized		∗ The factory default setting is “0”. (Setting
• IMPACT	: bass and treble empha-		range: –6 to 6)
		3.	When the adjustment is complete, press the
	sized
• EXCITE	: bass and treble empha-		[A] button several times until the function

sized mid de-emphasized mode is reached.

• USER CUSTOM : user custom

• TONE BYPASS : no sound effect

Adjusting the tone

Press the [A] button and select the item to ad- just. Each time you press the [A] button, the item changes in the following order:

●When “BASS BOOST” is set

“NON-FAD VOL” ➜ “BASS BOOST” ➜ “BALANCE” ➜ “FADER” ➜ Last function mode.

●When “IMPACT” is set

“NON-FAD VOL” ➜ “IMPACT” ➜ “BAL- ANCE” ➜ “FADER” ➜ Last function mode.

●When “EXCITE” is set

“NON-FAD VOL” ➜ “EXCITE” ➜ “BAL- ANCE” ➜ “FADER” ➜ Last function mode.

●When “USER CUSTOM” is set

“NON-FAD VOL” ➜ “BASS <GAIN>” ➜ “MID <GAIN>” ➜ “TREB<GAIN>” ➜ “BALANCE” ➜ “FADER” ➜ Last function mode.

Adjusting the bass

The bass gain, bass F (center frequency) and bass Q can be adjusted as follows.

1.Press the [A] button and select “BASS <GAIN>”.

2.Press the [a] or [d] button and select from “BASS <GAIN>” ➜ “BASS <F 50>” ➜ “BASS <Q 1>” ➜ “BASS <GAIN>”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and adjust the gain, the F (center frequency) and the Q.

BASS GAIN : –6 to 8 (The factory default setting is “0”)

BASS F : 50Hz/80Hz/120Hz (The fac- tory default setting is “50”)

BASS Q : 1/1.25/1.5/2 (The factory de- fault setting is “1”)

4.When the adjustment is complete, press the [A] button several times until the function mode is reached.

●When “TONE BYPASS” is set

“NON-FAD VOL” ➜ “BALANCE” ➜ “FADER” ➜ Last function mode.

∗Pressing the [BEQ] button for 1 second or longer while in “USER CUSTOM” sets flat, and displays a “BEQ FLAT” message.

Note:

•When the separately-sold digital sound processor (DPH910) is used, the bass and treble tone ad- justments cannot be made. To adjust the tone, re- fer to the section “DSP Operations”.

Adjusting the MID

The MID gain, MID F (center frequency) and MID Q can be adjusted as follows.

1.Press the [A] button and select “MID <GAIN>“.

2.Press the [a] or [d] button and select from “MID <GAIN>” ➜ “MID <F 1k>” ➜ “MID <Q 2>” ➜ “MID <GAIN>”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and adjust the gain, the F (center frequency) and the Q.

MID GAIN : –6 to 6 (The factory default setting is “0”)

14 DXZ825